Dosing pumps
Since 30 years the company Etatron is producing and developing dosing pumps. The pumps are used in a wide field of different applications:- Water and waste water treatment
- Swimming pool (i.e. chlorine dosing)
- Galvanic coatings
- Food and beverage industry
- Agricultural applications
- Ink Industry
DLX Serie
Max.
flow rate: 20 l/h
Max. back pressure: 20 bar
Voltage: 12 /24 VDC 24/110/230 VAC
Valves: lip or ball check valves
Materials: on request, depending on the medium
and application
The DLX-series is
also available with the following controllers: |
|
|---|---|
| DLX-MA/A Analogical dosing pump. Manual flow rate adjustment from 0 -20 and 0-100 % |
DLX-pH/M Microcontroller dosing pump with pH control and regulation instrument built-in |
| DLX-MA/MB Microcontroller dosing pump with manual digital flow rate adjustment from 0 -100 %. |
DLX-Rx/M Microcontroller dosing pump with Redox control and regulation instrument built-in |
| DLX-MA/M Microcontroller dosing pump with manual digital flow rate adjustment from 0 -100 %. Integrated pressure control system - HRS |
DLX-CD/M Microcontroller dosing pump with conductivity control and regulation instrument built-in |
| DLX-MF/M Multi functions dosing pump with timer, reed contact (water meter), ppm or mA input |
DLX-CL/M Microcontroller dosing pump with free chlorine control and regulation instrument built-in |
| DLX-CC/M Microprocessor dosing pump. Remote controlled by incoming mA signal (settable by user, between 0-20 mA) |
DLX-VFT/M Microprocessor proportional dosing pump for potential free contact (water meter) |
Pool Control
Complete system with pH and Redox measurement for the private pools up to 100 cm³
Our low cost models
PKX - Solenoid dosing Pump
Max.
flow rate: 10 l/h
Max. back pressure: 5 bar
Available controllers:
- Manual flow rate adjustment
- Remote controlled by incoming mA signal
- Controlled through potential free contact
(water meter) - Pump has 2 different power supplies and 2 independent manual flow rate adjustments
Voltage: 12 /24 VDC 24/110/230 VAC
Valves: lip or ball check valves
Materials: on request, depending on the medium and application
B Series - Peristaltic pump
Max.
flow rate: 6 l/h
Max. back pressure: 3 bar
Available controllers:
- Constant flow rate
- Manual flow rate adjustment
- Integrated conductivity controller to maintain a detergent concentration
Voltage: 12 /24 VDC 24/110/230 VAC Tube material: Santoprene®, Silicone
Other pumps, hydraulic parameters or accessories upon request.
Download
© Eckerle Industrie-Elektronik GmbH• Otto Eckerle Str. 6/12A • D-76316 Malsch • Tel. +49 (0) 7246 / 9204-0 • Imprint